Polyfix CA Activator expedites the bonding time of gel or high viscosity cyanoacrylate glues. However, it can be used with other viscosities also. Polyfix Spray activator is solvent based, which when used with CA glue provides instant cure. It has non blooming properties, due to which it doesn’t leave any white marks on the surface.
Works with glue applications related to Wood, Ceramic, Plastic, Metal sheets, Acrylic etc.
Product Details:
Minimum Order Quantity | 10 Piece |
Packaging Type | Pack |
Full Cure | 3 seconds |
Packaging Size | 100 ML |
Material | Spray |
Grade Standard | Chemical Grade |
Usage/Application | Metal,Handicraft, MDF, Board |
spray activator is an aerosol activator which will give an instant cure if used with cyanoacrylate glue. This activator can be used before or after applying cyanoacrylate glue to surface which is to be bonded. It is commonly used with high viscosity or gel cyanoacrylates as the drying time for both of them are slow. The accelerator is solvent based and when applied dries immediately leaving a very thin layer of activator on the surface.
Properties
· Our Spray Activator is an aerosol accelerator which expedites the curing time of the high viscosity gel glue
· It dries immediately & leaves a very thin layer of activator on the surface
Storage: Room Temperature
Shelf Life: 6 months
Safety Measures
· Read the instructions before use
· Always wear gloves for protection
· Keep away from eyes & out of children’s reach
· Use in well ventilated area
· Do not panic in case of an accident, rush to a doctor
Additional Information:
Product Details:
Brand | Polyfix |
Packaging Type | 50 gm bottle with 100 ML Spray Activator |
Form | Liquid |
Usage/Application | Ceramic, Wood, Plastic, MDF |
Color | Transparent |
Shelf Life | 4-5 month if store below 20 degree |
Fixture Time | 5-6 seconds |
Our cyanoacrylate adhesive & Spray Activator are perfect to make small furniture from mica pasted wood instantly. A High Viscosity product, Gel Glue is ideal to bond the porous & rough surface of wood. In this video we have shown you the making of a small wooden products like stool without using any nails or screws.
Directions for usage:
· Take three pieces of Mica, plywood boards & cut them according to the length needed
· Apply Gel Glue on one side of the board, spray the activator on the other side& paste the two boards
· Once the desired bonding has been attained, paste the third board in the same manner
· A durable stool is ready for any of your household or commercial use.
· As the stool is made without any nails, there is no question of rusting or any misalignment
· The strength received is not easy to break.
Storage: Under 20 degrees
Shelf Life: According to grade & application
Safety Measures
· Read the instructions before use
· Always wear gloves for protection
· Keep away from eyes & out of children’s reach
· Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
· If the glue sticks to your hands, remove it with the help of acetone/ warm water.
· Do not panic in case of an accident, rush to a doctor
Additional Information:
Product Details:
Minimum Order Quantity | 1 Pair |
Packaging Size | 30 gm Adhesive and 100 ml Spray Activator |
Features | Instant Joint,Good Strength |
Surface Of Application | Glass, Plastic, Ceramic |
Grade Standard | Cyanoacylate Glue |
Application Industry | Construction, Woodworking |
Color | Transparent |
Usage/Application | Wood, Plastic, Paper, Ceramic |
Packaging Type | Super Glue |
Form | Liquid |
Strength | High |
Country of Origin | Made in India |
Instant Gel Glue cyanoacrylate adhesive & Spray Activator successfully launched by Benson Polymers, are very different from the other adhesives available in the market. The accelerated strong bond achieved by our products is unmatchable.
This video shows you how to fasten a jagged & rough piece of broken bike indicator.
Directions for usage:
· Clean the bike indicator & the surface on which it is to be pasted. For better results, the area should be dust-free
· Apply a coat of instant gel glue on the broken part & spray the activator.
· Put the broken piece on its place & hold tightly for a few moments
· Within no time, the part will be joined without leaving any traces of being broken before.
Storage: Under 20 degrees
Shelf Life: According to grade & application
Safety Measures
· Read the instructions before use
· Always wear gloves for protection
· Keep away from eyes & out of children’s reach
· Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
· If the glue sticks to your hands, remove it with the help of acetone/ warm water.
· Do not panic in case of an accident, rush to a doctor
Product Details:
Packaging Type | Bottle |
Form | Liquid |
Color | Transparent |
Shelf Life | 5-6 Month if store below 20 degree |
Usage/Application | Wooden Craft,Wooden Corners,Wooden Furniture,Timber Industry |
Country of Origin | Made in India |
Wooden Shelf Columns can be used at various places like shops, showrooms & at our homes. They can be mounted on the walls or kept on side tables. Products displayed or decorative items showcased on these columns look very attractive.
In this video, we have shown you the process of making such columns with the help of Gel Glue along with Spray Activator
Directions for usage:
· We have constructed a 5 shelved column in this video
· Cut various plywood pieces according to the shape & length required
· Start assembling the column by pasting smaller pieces to the bigger piece
· Apply Gel Glue on the smaller piece & spray the activator on the bigger piece & join both of them. Bonding will be achieved within a few seconds
· Similarly put all the pieces on the desired points & a multipurpose shelf column will be ready in just a few minutes
Storage: Under 20 degrees
Shelf Life: According to grade & application
Safety Measures
· Read the instructions before use
· Always wear gloves for protection
· Keep away from eyes & out of children’s reach
· Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
· If the glue sticks to your hands, remove it with the help of acetone/ warm water.
· Do not panic in case of an accident, rush to a doctor
Additional Information:
Product Details:
Minimum Order Quantity | 1 Pair |
Grade Standard | Industrial Grade |
Usage/Application | LED Strips On Sign Boards |
Surface Of Application | Plastic,Paper,Ceramic,Wood,LED Strips Lights |
Features | Instant Adhesive |
Brand | Polyfix |
Color | Transparent |
Packaging Type | Super Glue |
Form | Liquid |
The popularity of LED signboards, has risen drastically in the last few years. Maintaining these boards is cumbersome, as within a short span of time the LED light strip, used to illuminate the board, gets unglued & leaves the surface.
Benson Polymers has launched the combination of Gel Glue & Spray activator to eradicate this problem.
How to use:
· To paste the LED light strip to the signboard, gel glue cyanoacrylate adhesive is applied on the surface & the strip in sticked on it.
· Once it gets dried up, we put another layer of the gel glue on both sides of the strip
· After a few moments, POLYFIX spray activator is sprayed to decrease the curing time & strengthened bonding.
· Our products help in making the task very easy & it can be accomplished within a very short span of time. Thus, the production gets increased with much less time & labour.
Storage: Under 20 degrees
Shelf Life: According to grade & application
Safety Measures
· Read the instructions before use
· Always wear gloves for protection
· Keep away from eyes & out of children’s reach
· Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
· If the glue sticks to your hands, remove it with the help of acetone/ warm water.
· Do not panic in case of an accident, rush to a doctor
Product Details:
Minimum Order Quantity | 20 Piece |
Usage/Application | Wood, Plastic, Ceramic |
Packaging Size | 20 gm,50gm and 250 gm bottles |
Packaging Type | Plastic Bottles |
Color | Transparent |
Form | Liquid |
Surface Of Application | WPC, WPC bonding, HDHMR |
Grade Standard | Industrial Grade |
Mobile charging stations are made up of mica-mdf boards & acrylic sheets. This is also one of the many applications of Grab N Fix Gel Glue. In the attached video, please see how can a mobile charging station be made from mica-mdf boards & acrylic sheets. Other adhesives take up a lot of time in adhesion, leave white or yellow marks & they also require the material to be clamped or taped but the time spent while making it with Grab N Fix gel glue was much less than the other adhesives available. Grab N Fix Gel Glue can strongly bond the boards & acrylic sheets in minutes without any other help.
Other Suitable substrates
Acrylic to mica pasting, Wood to wood pasting, Stone repair & pasting, Metal to wood pasting HDHMR to HDHMR, WPC to WPC pasting, PVC moulding, HPL bonding etc
Advantages
· High viscosity gel glue can easily bond surfaces which are porous/ Non porous & difficult to adhere.
· The thick glue does not get absorbed, fills the gaps which makes it smoother & helps in bonding of the two surfaces
· Fastest adhesion without any clamping
· Strong bonding
Instructions to use
· Get the boards ready to be assembled.
· Clean the area of any dirt or water.
· Apply Grab N Fix Gel Glue on the board & spread it evenly.
· Paste acrylic sheet to the board & let it rest undisturbed for 10-15 minutes.
· Repeat the same process with rest of the pieces.
· Assemble all the boards, according to the design & shape of mobile charger station.
Safety Measures
· Avoid contact with eyes
· In case of an accident do not panic, wash with lukewarm water. In case of persisting irritation contact a doctor immediately
· If fingers get sticked, wash with soapy water/ to clean surfaces use POLYFIX debonder.
Addition information: -
Storage: Under 20 degrees/ Cold Storage
1000 cps gel glue
Payment mode BANK TRANSFER
Port of dispatch Delhi
Delivery Time 1-2 days
Payment terms Advance
Sample availability On request
Additional Information:
Product Details:
Packaging Size | 50 gm bottle with 100 ML Spray Activator |
Grade Standard | Industrial Grade |
Usage/Application | Plastic, Paper, Ceramic, Wood, Glass |
Packaging Type | 50 gm bottle with 100 ML Spray Activator |
Color | Transparent |
Shelf Life | 4-5 month if store below 20 degree |
Fixture Time | 5-6 seconds |
Raw Material | Ethly CA Glue |
Brand | Polyfix |
Is It ISO Certified | ISO Certified |
I Deal In | New Only |
Description
A wide variety of mobile covers are available in market, made up of different materials. These are really fashionable & extravagant; therefore, they are not affordable to everyone. Polyfix gel glue & spray activator can help you make a funky cover out of a simple mobile cover by pasting various decorative items & you can customize them as per your own liking.
Other Suitable substrates
Acrylic pasting, metal to acrylic, Granite/ stone repair, wood to metal/ wood, rubber bonding etc
Advantages
· Many brands are available in the market but they are very thin in consistency, due to which they get absorbed. Polyfix Gel Adhesive is thick & does not get absorbed by the surface
· Single Component CA Adhesive
· Polyfix Gel Glue instantly fills the gaps & holes which are naturally present in the wood, otherwise pasting will be very difficult.
· Polyfix accelerator expedites the adhesion of the high viscosity gel glue.
· Its non-blooming nature does not leave white marks after the application.
· Polyfix Spray Activator dries immediately & leaves a very thin layer of activator on the surface
Instructions to use
· Clean the surface area.
· To avoid getting glue on your hands, apply gel glue on a piece of butter paper & keep the accessory on it.
· Spray the activator on the cover & paste the decorative piece on the same
· Within minutes, your simple cover will become a funky one.
Safety Measures
· Keep out children’s reach & away from eyes
· In case of an accident, do not panic & consult a doctor
· Surface should be clean of any dust, rust, water or dirt
Product Details:
Packaging Size | 50 gm bottle with 100 ML Spray Activator |
Grade Standard | Industrial Grade |
Usage/Application | Plastic, Paper, Ceramic, Wood, Glass |
Form | Liquid |
Color | Transparent |
Viscosity | 800-1000 cps gel glue |
Shelf Life | 4 month if store below 20 degree |
Fixture Time | 5-6 seconds |
Full Cure | 1 -2 minutes |
Gap Fill | Small Gap Filling |
Brand | Polyfix |
Is It ISO Certified | ISO Certified |
I Deal In | New Only |
Broken car indicators are not uncommon. In today’s fast life, going to mechanic’s is not easy. What would you say, if we tell you that you can complete such small works by yourself? Fix automobile’s mini indicator by using Polyfix Gel Glue & Polyfix Spray activator. Our dynamic duo of super gel glue & spray activator gives effective pasting in no time. The application is so easy that it can be done anytime anywhere.
Other Suitable substrates
Acrylic pasting glue, plastic bonding adhesive, adhesive for automotive repairs, glue for artificial jewellery making, wood glue, WPC adhesive, PVC Foam etc
Advantages
· High viscosity, single component CA glue
· Easy to apply & sets within minutes
· Ideal to bond many substrates
· Attains full pasting & strong bond within minutes, while other adhesives take much more time.
· Repairs cracks & breakage.
· Spray activator works to expedite the drying of high viscosity thick glue, which otherwise takes time.
· Polyfix spray activator is non blooming & removes any stains left by cyanoacrylate glue.
· Polyfix Spray Activator dries immediately & leaves a very thin layer of activator on the surface
Instructions to use
· Clean the indicator & car surface both.
· Apply adhesive on the indicator & spray the activator on the car surface where the indicator is to be pasted.
· Fix the indicator on the designated area & put pressure to give decent adhesion.
Safety Measures
· Cyanoacrylate products if left uncapped may deteriorate by contamination from moisture present in the air.
· Surface area should be clean of any dust or moisture.
· Keep away from children’s reach & away from eyes
· In case of an accident, consult a doctor.
Addition information: -
Storage: Under 20 degrees/ Cold Storage
Spray Activator- In room temperature
No exposure to direct sunlight
800-1000 cps gel glue
Additional Information:
Product Details:
Minimum Order Quantity | 1 Pair |
Material | Cyanoacrylate Adhesive |
Usage/Application | Plastic, Metal etc. |
Packaging Type | Gel Glue in plastic bottles and Spray Activator in Glass Bottles |
Surface Of Application | Plastic, Paper |
Grade Standard | Industrial Grade |
Brand | Polyfix Super Glue |
Form | Liquid |
Color | Transparent |
Shelf Life | 6 Month If store below 20 degree |
Description
Broken Car accessories like Spoilers not only look bad but are also difficult to get repaired. If the bolt gets broken & the spoiler gets detached then it may have to be replaced. Polyfix Gel Glue & Spray Activator can help in attaching the broken piece back to the car body, so that the spoiler can be fixed on it again. Our Gel Adhesive is a thick glue which gets evenly spreads on the surface & provides rapid adhesion as compared to the other products available.
Other Suitable substrates
plastic with plastic bonding, plastic with rubber bonding, acrylic with acrylic bonding, Metal to metal pasting, wood to wood pasting, Stone repair & pasting, Metal to wood pasting, WPC to WPC, HDHMR, HPL, MDF, PVC moulding pasting
Advantages
Instructions to use
Safety Measures
Addition information: -
Storage: Gel Glue- Under 20 degrees/ Cold Storage
Spray Activator- In normal room temperature
Payment mode BANK TRANSFER
Payment terms Advance
Sample availability yes
Additional Information:
Product Details:
Minimum Order Quantity | 1 Pair |
Brand | Polyfix |
Packaging Size | Polyfix Spray Activator in 100 Ml and Polyfix Gel glue in 50 gm and 250 gm bottle |
Packaging Type | Polyfix Spray Activator in 100 Ml and Polyfix Gel glue in 50 gm and 250 gm bottle |
Surface Of Application | Plastic, Ceramic, Certain Plastics, HPL, PVC moulding, Wood to wood pasting, granite/ stone repair, wood to metal, rubber bonding, WPC boards, mica/ mdf pasting, acrylic to mdf etc. |
Grade Standard | Industrial Grade |
Form | liquid |
Usage/Application | Plastic, Ceramic, Wood |
Color | Transparent |
Shelf Life | 6 Month if store below 20 degree |
Description
In today’s rushed times, little bit bumping of cars on the roads is very frequent. One of the most common damage is a broken bumper. Usually, to repair a bumper, welding is done which takes time, energy, electricity & money. We offer a quick, easy & much cheaper solution for this, the dynamic duo of Polyfix Gel glue & Polyfix Spray Activator. Please refer to the video attached.
Other Suitable substrates
Granite/ stone repair, wood to metal/ wood, rubber bonding, mica/ mdf pasting, acrylic to mdf, WPC pasting, adhesive for HDHMR, HPL glue etc.
Advantages
· Polyfix Gel Glue is ideal to bond rough & jagged surface like that of a broken bumper. The application of this super glue on the surface makes it smoother & makes the pasting easy
· Gel Adhesive does not get absorbed by the surface.
· Rapid & strong bonding, achieved in a few minutes.
· Polyfix Spray Activator is an accelerator which expedites the adhesion of the high viscosity gel glue.
· Polyfix spray activator is non blooming & does not leave white marks after the application.
Instructions to use
· Clean the broken area
· An iron net is cut & put on the cracked bumper.
· Apply our super adhesive over the net on the broken area & spray the activator.
· Put pressure on the same for a couple of minutes.
· You will receive an unmatched strength within minutes & the broken piece will be joined again in moments, without any hard labour.
· Safe to use
Safety Measures
· In case of eye contact, rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary.
· Close the cap firmly after use, to avoid deterioration.
· Keep away from children’s reach.
· In case of an accident, consult a doctor.
Addition information: -
Storage:
High Viscosity glue :- Under 20 degrees/ Cold Storage
Spray Activator- In room temperature
Additional Information:
Product Details:
Minimum Order Quantity | 1 Pair |
Form | liquid |
Packaging Type | Bottle |
Surface Of Application | Plastic, Ceramic |
Grade Standard | Industrial Grade |
Usage/Application | Plastic, Wood, Ceramic |
Brand | Polyfix |
Packaging Size | Polyfix Spray Activator in 100 Ml and Polyfix Gel glue in 50 gm and 250 gm bottle |
I Deal In | New Only |
Grade | CA Instant Glue |
Benson Polymers Ltd. always tries to make their client’s lives easier with our different grade adhesives & their use in various applications. We have come up with a solution for broken car tail lights. No need to take it to a mechanic. The combination of Polyfix Instant Gel Glue & Polyfix Spray Activator not only repairs it but it is so easy that it can be done without any professional help.
Other Suitable substrates
Certain Plastics, Rubber bonding, mica/ mdf pasting, acrylic to mdf, WPC Boards, Acrylic sheets glue, HDHMR adhesive etc.
Advantages
· Single component CA glue
· The thick gel glue does not get absorbed, fills the gaps easily & helps in bonding of the two surfaces
· Thin viscosity adhesives get absorbed by the wood & cannot give satisfactory adhesion. Polyfix Gel Adhesive is thick & does not get absorbed by the surface
· Strong bonding attained within minutes, while other adhesives take more than 24 hours to get fully pasted.
· Polyfix Spray Activator can be used to expedite the adhesion of the high viscosity gel glue.
· Non blooming feature does not leave white marks after the application.
Instructions to use
· Clean the area with a cloth.
· Apply a layer of gel glue to the broken piece & bond with the other piece.
· Spray the Polyfix Activator & wait for a few minutes
· The tail light will be as good as new in just a short span of time
Safety Measures
· Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
· If the glue sticks to your hands, remove it with the help of POLYFIX Debonder/ warm water.
· Do not panic in case of an accident, rush to a doctor.
Addition information: -
Storage:Under 20 degrees/ Cold Storage
Spray Activator In room temperature
1000 cps glue
Payment mode BANK TRANSFER
Port of dispatch Delhi
Delivery Time 3-4 day
Payment terms Advance
Additional Information:
Product Details:
Minimum Order Quantity | 2 Pack |
Brand | Polyfix |
Packaging Size | 100 ml Spray Activator & High Viscossity |
Packaging Type | Tube |
Application Industry | Repairing Glue |
Surface Of Application | Plastic, Ceramic, Metal |
Form | High Viscosity and Spray Activator |
Grade Standard | Industrial |
Strength | High |
Material Compatibility | Ceramic, Plastic, Metal |
Color | Transparent |
Appearance | Clear |
Working Time | With in Seconds |
Curing Time | 5-10 Seconds |
Shelf Life | 6 Month if store below 20 degree |
Description
We provide best CA glues for instant pasting, which saves time & manpower. The usage is so easy that it can be done at home also without any help. We also recommend the use of Spray Activator with thick glues so that the cure time may be expedited. Due to thick consistency the drying time of high viscosity glues is more than that of thin glues. They provide more repositioning time. Our products are versatile & are better than any other adhesives present in the market. Watch our video to see how to repair sunglasses easily.
Other Suitable Applications
Acrylic pasting adhesive, metal to acrylic pasting glue, Granite/ stone repair & pasting glue, wood to metal/ wood adhesive, rubber bonding glue, mica/ MDF pasting glue, acrylic to MDF adhesive etc.
Advantages· Single component CA glue
· Drip free adhesive with super strong hold.
· Thin viscosity adhesives get absorbed by some surfaces & cannot give satisfactory adhesion. Polyfix Gel Adhesive is thick & does not get absorbed.
· Strong bonding attained within minutes, while other adhesives take more than 24 hours to get fully pasted.
Safety Measures
· Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
· If the glue sticks to your hands, remove it with the help of Polyfix Debonder.
· Do not panic in case of an accident, rush to a doctor
· Always wear gloves for protection
· Keep away from eyes & out of children’s reach
Additional information: -
Storage: Under 20 degrees/ Cold Storage
Keep away from direct sunlight
800-1000 cps glue
Payment mode BANK TRANSFER
Port of dispatch Delhi
Delivery Time 1 day
Packing Detail 1 day
Sample availability Please ask for samples
Additional Information:
Product Details:
Minimum Order Quantity | 2 Pack |
Packaging Size | 30gm High Viscosity and 100 ml Spray Activator |
Packaging Type | 100ml |
Surface Of Application | Ceramic, Metal, Plastic |
Form | High Viscosity and Spray activator |
Grade Standard | Industrial |
Material Compatibility | Plastic, Metal, Ceramic |
Color | Transparent |
Appearance | Clear |
Fixture Time | With in seconds |
Curing Time | 10-15 seconds |
Is It Eco Friendly | No |
Shelf Life | 6 month if store below 20 degree |
Our adhesives are specially formulated adhesives. It gives permanent & sheer strength, to an otherwise tricky substrate. Our adhesive’s performance is better than all other brands in the market as it gives perfect bonding, has less curing time, promises durability & application is very easy. Just open the bottle & apply the adhesive. Our Gel glue & spray activator can be used to paste artificial grass to terrace or balcony floor. It looks real enough & makes your home much more beautiful. Please watch our video to see how to use the same.
Other Suitable Applications
Wood to wood pasting glue, wood to metal pasting glue, instant thick glue, CA glue accelerator, plastic adhesive, rubber adhesive, ceramic pasting, stone pasting, granite repair etc.
Advantages
Additional information: -
Storage: Under 20 degrees/ Cold Storage
Keep away from direct sunlight
Room temperature for Spray Activator
800-1000 cps glue
Payment mode BANK TRANSFER
Port of dispatch Delhi
Delivery Time 1 day
Packing Detail 1 day
Sample availability Please ask for samples
Additional Information:
Product Details:
Brand | Polyfix |
Packaging Size | 50gm and 100ml |
Packaging Type | Tube |
Application Industry | Woodworking, Hardware Industry |
Surface Of Application | Plastic, Rubbers, Wood |
Form | Liquid |
Grade Standard | Industrial |
Strength | High |
Material Compatibility | marble to marble, stone pasting glue, wood adhesive |
Chemical Resistance | Adhesive |
Color | Transparent |
Appearance | Clear |
Fixture Time | Within few Seconds |
Curing Time | 5-10 Seconds |
Shelf Life | About 6 month from manufacture if unopened,and store below 20 degree |
Description
Polyfix adhesives are rapid pasting glue which gives superior strength & does not need any external force to be applied to make it work. Single component glues do not need any heating or mixing before use. These products can be used to repair almost everything at home. Whether it is wood, marble, metal, porcelain, ceramic etc. The usage is absolute hassle-free & can be done instantly. Watch our video to see how to repair bathroom amenities with Polyfix products.
How to use
· Clean the surface.
· Apply adhesive on the panel.
· Spray the activator on the holder surface.
· Paste & apply a little pressure.
Other Suitable Applications
Metal to tile pasting glue, thick gel glue, high viscosity instant glue, CA glue accelerator, paste marble to marble, stone pasting glue, wood adhesive, strongest CA glue, best super glue, super glue for metal etc.Advantages· High bonding strength · More repositioning time than low viscosity glue· Good bonding received in less time· High viscosity adhesive, a unique composition.
· Ideal to bond rough surfaces also
Safety Measures
· Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
· If the glue sticks to your hands, remove it with the help of Polyfix Debonder
· Use well ventilated area.
· Do not panic in case of an accident, rush to a doctor
Additional information: -
Storage: Under 20 degrees/ Cold Storage
Keep away from direct sunlight
800-1000 cps glue
Payment mode BANK TRANSFER
Port of dispatch Delhi
Delivery Time 1 day
Packing Detail 1 day
Additional Information:
Product Details:
Brand | Polyfix |
Packaging Size | 50gm and 100ml |
Packaging Type | Tube |
Application Industry | Wood to wood pasting glue, stone repair & pasting glue, metal to wood pasting adhesive etc |
Surface Of Application | Wood, Metal, Stone, Marble |
Form | Liquid |
Grade Standard | Industrial |
Strength | High |
Material Compatibility | Plastic, Ceramic, Metal |
Chemical Resistance | Instant Adhesive with Spray Activator |
Color | Transparent |
Appearance | Clear |
Fixture Time | 10-15 seconds |
Curing Time | With in seconds |
Shelf Life | 6 month if store below 20 degree |
Polyfix offers adhesive for multiple uses. Our thick consistency adhesive has maximum pasting power & works in much less time. It doesn’t have to be mixed & can be applied directly from the user-friendly bottles. We provide customization of our products also as per our client’s needs & requirements. These days people like to have lights inside almirahs. For this application, Polyfix gel glue is the best adhesive. Along with Polyfix spray activator it gives excellent pasting. The application is so easy that it can be done at home also without any professional help.
How to use:
· Clean the surface.
· Apply adhesive on the light panel.
· Spray the activator on almirah surface, where it is to be pasted.
· Paste the light panel & apply a little pressure.
Other Suitable Applications
Wood to wood pasting glue, stone repair & pasting glue, metal to wood pasting adhesive etc
AdvantagesSafety Measures
· Read the instructions before use
· Always wear gloves for protection
· Keep away from eyes & out of children’s reach
· Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
· If the glue sticks to your hands, remove it with the help of acetone/ warm water.
· Do not panic in case of an accident, rush to a doctor.
Additional information: -
Storage: Under 20 degrees/ Cold Storage
800-1000 cps glue
Keep away from direct sunlight
Payment mode BANK TRANSFER
Port of dispatch Delhi
Delivery Time 1 day
Packing Detail 1 day
Additional Information:
Product Details:
Brand | Polyfix |
Packaging Size | 50 gm bottle with 100 ML Spray Activator |
Packaging Type | Tube |
Application Industry | Wood, Plastic, MDF, Ceramic, stone |
Surface Of Application | Wood, Plastic |
Form | Liquid |
Grade Standard | Industrial |
Strength | High |
Material Compatibility | Metal, Ceramic, Plastic |
Curing Time | 5-10 Seconds |
Shelf Life | 4-5 month if store below 20 degree |
Description
To prevent breakage of wall tiles, where damage is inevitable, SS pieces are pasted on the edges to keep them intact. For this application our high viscosity super glue remains the most ideal adhesive as it is perfect to paste tricky substrates. The above-mentioned qualities help in durable & strong pasting. Polyfix adhesives can give durability, instant pasting & high strength. Polyfix repair adhesives are easy to handle, gives best results, takes less time to paste & ensures durability. Our high viscosity adhesive is best for this application as the work can be done in much less time with much less labour, without any compromise in quality.
How to use:
· Cut the SS piece according to the tile size.
· Apply a layer of the adhesive on the SS. Spray Polyfix activator on the tile surface
· Paste the piece on the tile.
· Apply a little pressure & give some fixing time.
Other Suitable Applications
Ceramic pasting glue, repair ceramic tiles, WPC adhesive, PVC skirting adhesive, wood adhesive, granite pasting glue
· Single Component High Viscosity adhesive
· Polyfix thick Glue is ideal to bond rough surfaces. The application of this super glue on the surface makes it smoother & makes the pasting easy
· Our special adhesive is thick & does not get absorbed by the surface.
· Quick & strong adhesion attained in mere minutes with Polyfix spray activator.
· Non blooming property of the activator helps in cleaning any stains of CA glue
Safety Measures
· Always wear gloves for protection
· Keep away from eyes & out of children’s reach
· Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
· Any excess glue can be removed with Polyfix Debonder.
Additional information: -
Storage: Under 20 degrees/ Cold Storage
No exposure to direct sunlight
Room temperature for Polyfix Spray Activator
800-1000 cps gel glue
Payment mode BANK TRANSFER
Port of dispatch Delhi
Delivery Time 1 day
Packing Detail 1 day
Sample availability Please ask for samples
Product Details:
Brand | Polyfix |
Packaging Size | 50gm high viscosity and 100 ml spray activator |
Packaging Type | Tube |
Application Industry | Woodworking |
Surface Of Application | Wood, Plastic |
Grade Standard | Industrial |
Strength | High |
Material Compatibility | Metal, Ceramic, Plastic, CeramicWood, MDF |
Chemical Type | Cyanoacrylate Adhesive |
Color | Transparent |
Appearance | clear |
Fixture Time | With in seconds |
Polyfix high viscosity glue does not need any mixing, it is heat resistant & gives absolute stunning pasting in much lesser time. Once it attains full adhesion, even strong pressure cannot break the bond. Polyfix adhesive has the accurate composition for this material & gives best & strong pasting within a short span of time. We are instrumental in providing various viscosities of adhesives which can be used for different applications. We also provide Polyfix Spray Activator for accelerated curing of high viscosity glue. We share with you a lot of crafty ideas, which you can make in your spare time. Watch our videos to know more about the same.
Other Suitable Applications
Craft Glue, Hobby ideas with CA glue, wood glue, paste glitter on wood, CA gel glue, thick gel adhesive etc.
AdvantagesSafety Measures
Additional information: -
Storage: Under 20 degrees/ Cold Storage
No exposure to direct sunlight
800-1000 cps glue
Payment mode BANK TRANSFER
Port of dispatch Delhi
Delivery Time 1 day
Packing Detail 1 day
Product Details:
Brand | Polyfix |
Packaging Size | High Viscosity available in 50gm and spray activator in 100 ml |
Application Industry | Construction, Woodworking |
Surface Of Application | Plastic, Wood |
Form | Liquid |
Grade Standard | Industrial |
Strength | High |
Material Compatibility | Plastic, Ceramic, Marble, stone, Wood |
Color | Transparent |
Appearance | Clear |
Polyfix adhesives are used in repair & manufacturing of many substrates. These promise speed, durability & high strength in minimum time & with less manpower. These can be used professionally & personally also. These are easy to use & best quality products. The dynamic duo of Polyfix quick glue & spray accelerator, helps in mending a lot of substrates. Please watch our video to see how to repair a laptop cooling pad without any extra help & in less time. We provide adhesives to places like Kheda, Faridabad, Panchkula, Shimla, Dhanbad, Bhopal etc.
Applications
Repair & manufacturing glue, plastic glue, acrylic pasting adhesive, instant cyanoacrylate glue, rapid pasting glue, Spray accelerator for cyano glue etc.
Advantages
How to use
Safety Measures
Addition information: -
Storage: Under 20 degrees/ Cold Storage for adhesive
Room temperature for the activator
800-1000 cps glue
Keep away from direct sunlight
Payment mode BANK TRANSFER
Port of dispatch Delhi
Delivery Time 1 day
Packing Detail 1 day
Sample availability Please ask for samples
Product Details:
Brand | Polyfix |
Packaging Size | 50gm High Viscosity and 100 ml spary activator |
Application Industry | Industrial Use |
Surface Of Application | Ceramic, Plastic |
Form | Liquid |
Grade Standard | Industrial |
Strength | High |
Color | Transparent |
Appearance | Clear |
Super-quick Gel Adhesive by Polyfix, is a high viscosity glue which is ideal to bond porous & rough surfaces. The consistency of gel glue, fills the gaps present on any surface & lets the substrate bond with any other surface easily. Polyfix CA Activator decreases the bonding time of gel or high viscosity cyanoacrylate glues, which usually takes time to dry. However, it can be used with other viscosities also. Polyfix Spray activator is solvent based, which when used with CA glue provides instant cure. It has non blooming properties, due to which it doesn’t leave any white marks on the surface.
Watch our video to see how to use this combination to repair refrigerator door shelves yourselves.
Applications
Acrylic pasting adhesive, metal to acrylic pasting glue, Granite/ stone repair & pasting glue, wood to metal/ wood adhesive, rubber bonding glue, mica/ mdf pasting glue, acrylic to mdf adhesive etc.
Advantage
How to use
Saftey Measures
Addition information: -
Storage: Under 20 degrees/ Cold Storage
Keep away from direct sunlight
800-1000 cps glue
Payment mode BANK TRANSFER
Port of dispatch Delhi
Delivery Time 1 day
Packing Detail 1 day
Sample availability Please ask for samplesProduct Details:
Brand | Polyfix |
Material | Acrylic |
Color | Transparent |
Packaging Type | Bottles |
Surface Of Application | Plastic,Paper,Ceramic,Wood |
Packaging Size | 50 gm and 250 gm |
Form | Liquid |
Shelf Life | 6 Month if store below 20 degree |
Fixture Time | With in 10 Seconds |
Is It ISO Certified | ISO Certified |
Packaging Details | Bottles |
Grade Standard | Industrial Grade |
Usage/Application | Fish Aquarium Manufacturing |
Benson Polymers’ POLYFIX Gel Glue is an ideal product for acrylic bonding. Through this video we have given an example of how to make an acrylic fish tank. POLYFIX Spray activator should be used for extra strength & less curing time and no whitening.
Directions for usage:
· Acrylic sheets are to be cut according to the size & design.
· POLYFIX spray activator is to be sprayed on one side of the sheet & small drops of POLYFIX gel glue should be put along with the spray
· Now another acrylic sheet can be placed on the glued area & generous amount of gel glue should be put on the joint of the two sheets & sprayed with the activator.
· Once the two pieces are strongly attached, then the same process can be repeated with the other three sheets & the tank will take a shape of an open cuboid.
Now the tank is ready to be filled with water & once the lid is made with the help of POLYFIX Gel Glue & POLYFIX spray activator, the fish aquarium is ready to provide a lovely abode for your aquatic friends.
Storage: Under 20 degrees
Shelf Life: According to grade & application
Safety Measures
· Read the instructions before use
· Always wear gloves for protection
· Keep away from eyes & out of children’s reach
· Always close the lid firmly after use, otherwise the quality may get compromised due to moisture in the air.
· If the glue sticks to your hands, remove it with the help of acetone/ warm water.
· Do not panic in case of an accident, rush to a doctor
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Polyfix |
Packaging Size | 100 Ml |
Packaging Type | Bottle |
Usage/Application | Personal and industrial |
Physical State | Liquid |
Color | Transparent |
Polyfix Debonder, is a solvent, typically acetone based that dissolves dried up CA. It is a very versatile cyanoacrylate adhesive remover. This material will remove adhesive from work stations, can be used on a wide range of surfaces, and can be used as a flushing solvent for dispensing systems. It is recommended that before use on a finished part, try the debonder on a small area to make sure that the surface is compatible. It is a single component, solvent based material.
Properties:
· Unsticks items together in a very short span of time
· Removes adhesives from clothing and other materials
· Helps in cleaning workstations, which regularly gets stained with CA glue
Shelf Life: 6 months
Storage: Normal Room Temperature
Packaging: 100 ml
Precautions:-
· In case of eye contact, rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary.
· Close the cap firmly after use, to avoid deterioration.
· Keep away from children’s reach.
· In case of an accident, consult a doctor.
· While being used on shiny or bright coloured surfaces, it should be tested on a small area first as after usage the colour or the shine may fade.
Additional Information: